Airaid 200-996 Bedienungsanleitung PDF herunterladen

Installation Instructions

For Part Numbers:

200-996 Modular Intake Tube

200-796 Jr. Kit 850-135 Airaid Oiled Media Filter

201-796 Jr. Kit 851-135 SynthaMax Dry Media Filter - Red

202-796 Jr. Kit 852-135 SynthaMax Dry Media Filter - Black

203-796 Jr. Kit 853-135 SynthaMax Dry Media Filter - Blue

Component Identification

1. *Airaid Premium Filter 1

2. Modular Intake Tube 1

3. Urethane Hump Hose 1

4. Silicone Coupler 1

5. 3/8” x 14” Breather Hose 1

6. #60 Hose Clamp 2

7. #64 Hose Clamp 2

8. 1/4”NPT x 3/8” Barb Fit. 1

* Filter included only in Jr. Kits

1. Disconnect the negative battery cable.

Remove the factory beauty cover by lifting up on the front, and then pull-

ing the cover towards the front of the vehicle. It is only held in place by

grommets.

2. Disconnect the factory breather hose at the valve cover.

3. Separate the factory intake tube from the plastic clamp barb that secures

the radiator hose to the tube. A firm downward push will usually do it.

4. Loosen two hose clamps on the factory intake tube. One at the throt-

tle body end, and the other at the Mass Air Flow sensor (MAF) end.

Mass Air Flow sensor

2007-13 Cadillac Escalade

2007-12 Cadillac Escalade ESV/EXT

2007-13 Chevrolet Avalanche/Silverado 1500

2007-13 Chevrolet Tahoe/Suburban 1500

2007-13 GMC Sierra 1500/Yukon/Yukon XL 1500

4.8L V8, 5.3L V8, 6.0L V8*, 6.2L V8

*With Electric Cooling Fans Only

*Does not fit 6.0L motors after 2010

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

5. Slide the factory intake tube off of the MAF sensor, rotate it up so that

it disengages from the mounting grommet on the intake manifold, and then

slide it forward off of the throttle body and remove it from the vehicle.

6. Install the silicone coupler (#4) on the throttle body end of the Modu-

lar Intake Tube (#2) with two #60 hose clamps (#6). Install the urethane

hump hose (#3) on the other end of the MIT with two #64 hose clamps

(#7). Leave all clamps loose for now. Install the 3/8” barbed fitting (#8)

into the MIT, and slide the 3/8” breather hose (#5) over the barbed fitting

as shown.

1 2

Inhaltsverzeichnis

Seite 1 - Component Identification

Installation Instructions For Part Numbers: 200-996 Modular Intake Tube 200-796 Jr. Kit 850-135 Airaid Oiled Media Filter 201-796 Jr. Kit 85

Seite 2 - Tune-Up Kit!

10. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 11.

Kommentare zu diesen Handbüchern

Keine Kommentare

Airaid 200-996 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 200-996 herunter. Airaid 200-996 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Airaid 200-996