Parts List
#1 ECONOAID x1
#2 Gasket x1
1. Disconnect the negative battery cable!
Lift up on the front of the engine beauty cover, and then re-
move it from the vehicle.
2. A.) Loosen two hose clamps, one at the air box, and one at
the throttlebody. B.) Squeeze the tab on the electrical connector
and disconnect it from the Mass Air Sensor. C.) Disconnect the
1/8” vacuum line from the air intake tube. D.) Disconnect the
crankcase breather hose from the intake tube. Remove the air
intake tube from the vehicle.
Thank you for purchasing the ECONOAID Throttlebody Booster. Please read the instruction manual carefully before pro-
ceeding with the installation. Contact ECONOAID @ (888) 876-4676 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit
or instructions that are not clear to you. Your ECONOAID Throttlebody Booster was carefully inspected and packaged. Check that
no parts are missing, or were damaged during shipping. If any parts are missing, please contact ECONOAID.
Tools Required For Installation
5/16”, 10mm Socket
Ratchet and Extension
Part Number 1014
2007-2015 Toyota Tundra/Sequoia
5.7L V8
2007-2014 Toyota Tundra 4.6L V8
2008-2012 Toyota Sequoia 4.6L V8
A.
B.
C.
D.
U.S. Pat. #7,665,442
Kommentare zu diesen Handbüchern