Installation Instructions
Part Number: 201-996 MIT OR
Part Number: 201-796 Jr. Kit
2007 -12 Chevrolet Silverado 1500
Tahoe/Suburban1500/Avalanche/
GMC Sierra 1500
Yukon/Yukon XL/Denali/Denali XL
Cadillac Escalade/ESV/EXT
4.8L, 5.3L, 6.0L*, 6.2L V-8
With Electric Cooling Fans Only
*Does not fit 2011-12 6.0L motors
*
Packing List:
#1 *851-135 Airaid Premium Filter 1
#2 KIT996T Modular Intake Tube 1
#3 KITHUMPS18 Urethane Hump Hose 1
#4 KITCOUPLER10 Urethane Coupler 1
#5 KITHOSE06 3/8” x 14” Breather Hose 1
KIT996HP Hardware & Instructions 1
#6 KITHS64 #64 Hose Clamp 4
#7 KITFITTING01 1/4”NPT x 3/8” Barb Fit. 1
* Filter included only in 200-796 kit
Tools Required For Installation:
5/16” Socket
Ratchet & Extension
Flat Screwdriver
#25 Torx Bit (200-796 Kit Only)
1. Disconnect the negative battery cable.
Remove the factory beauty cover by lifting up on the front, and then pull-
ing the cover towards the front of the vehicle. It is only held in place by
grommets.
2. Disconnect the factory breather hose at the valve cover.
3. Separate the factory intake tube from the plastic clamp barb that se-
cures the radiator hose to the tube. A firm downward push will usually do
it.
4. Loosen two hose clamps on the factory intake tube. One at the throt-
tle body end, and the other at the Mass Air Flow sensor (MAF) end.
Mass Air Flow sensor
Kommentare zu diesen Handbüchern