Parts List
#1 Poweraid Spacer x1
#2 Gasket x2
#3 6mm x 55mm Hex Bolts x4
#4 6mm x 75mm Hex Bolts x4
#5 6mm Flat Washers x4
Tools Required For Installation
5/16” Deep, 10mm Sockets
Ratchet & Extension
Installation Instructions
Part Number 400-619
Poweraid Spacer For
2007-10 Ford F-150 4.6L 2V
2007-08 Ford Explorer 4.0L
4.6L 2V motors are identified by having the
engine code W as the eighth VIN character.
(Does Not Fit 2009-10 3 Valve 4.6L F-150)
Thank you for purchasing the Poweraid Throttle Body Spacer. Please read the in-
struction manual carefully before proceeding with the installation. Contact AIRAID @ (800)
498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instructions that
are not clear to you. Your Poweraid Throttle Body Spacer was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any
parts are missing, please contact AIRAID.
Thank you for selecting AIRAID.
1. Disconnect the negative battery cable!
Disconnect the crankcase breather hose from the
engine air intake tube by pushing on the green tab,
and removing the hose from the nipple. Loosen the
hose clamp that holds the intake tube to the throttle
body, and slide the tube to the side to gain access to
the throttle body bolts.
2. Remove the four bolts (and/or nut and stud) from
the throttle body, and remove the throttle body from
the intake manifold, and set it aside. Retain the wir-
ing harness anchor from the upper left stud on the
Explorer for reinstallation in step #4.
The C.A.R.B. E. O. Number For This Spacer Does Not Include The
2010 F-150 At This Time……..It Is Pending
Kommentare zu diesen Handbüchern