Airaid 250-324 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 250-324 herunter. Airaid 250-324 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Installation Instructions
For Part Numbers:
250-324 700-469 Airaid Oiled Media Filter
251-324 701-469 SynthaMax Dry Media Filter - Red
252-324 702-469 SynthaMax Dry Media Filter - Black
253-324 703-469 SynthaMax Dry Media Filter - Blue
2008-09 Pontiac G8
6.0L & 6.2L V8
2. Loosen the intake tube clamps. Disconnect the Valve
cover breather and remove the factory intake tube.
3. Remove the two 6mm flange nuts securing the air box
assembly to the inner fender. And disconnect the Mass
Air Flow meter.
4. Remove the entire air box assembly from the vehicle.
5. Carefully remove the protective film from both sides
of the Air Dam.
6. Install the Filter Adapter onto the Air Dam as shown
using the three Button Head Screws and Flat washers.
8. Install the Adapter Coupler and Clamp onto the Fil-
ter Adapter.
7. Transfer the OEM grommets and steel sleeves from
the factory air box, into the Air Dam assembly as
shown. The grommets and steel sleeves are located on
the upper half of the box and the post grommet in in the
lower half.
9. Transfer the Air Flow meter into the Coupler as shown.
Note the location of the connector and direction indicat-
ing arrow. Do not tighten the Clamp at this time.
Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Cool Air Dam 1
4. Filter Adapter 1
5. Reducing Coupler 1
6. Hump Hose 1
7. Weatherstrip 28.5in 1
8. Adapter Coupler 1
9. Grommet 1
10. PCV Fitting 1
11. Barbed 90° Fitting 1
12. 1/4” Flat Washer 3
13. ¼-20 x 1/2” Button Head Screw 3
14. #56 Hose Clamp 1
15. #60 Hose Clamp 2
16. #64 Hose Clamp 1
17. #68 Hose Clamp 1
18. 5/8" Speed Clamp 2
19. PCV Hose 4" 1
1.Disconnect the negative battery terminal.
Depress the three locking tabs on the positive terminal
cover and remove it.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
FILTER IDENTIFICATION
700-469 Airaid Oiled Media 701-469 Airaid SynthaMax Dry Media - Red
702-469 Airaid SynthaMax Dry Media - Black 703-469 Airaid SynthaMax Dry Media - Blue
Post Grommet
Grommets and Sleeves
Connector
Arrow
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation Instructions For Part Numbers: 250-324 700-469 Airaid Oiled Media Filter 251-324 701-469 SynthaMax Dry Media Filter - Red 252-324

Seite 2 - Filter Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com P/N 790-551 Aerosol Spray P/N 790-5

Verwandte Modelle: 251-324 | 252-324 | 253-324 | 250-325 | 251-325 | 252-325 | 253-325 |

Kommentare zu diesen Handbüchern

Keine Kommentare