Airaid 300-221 Bedienungsanleitung PDF herunterladen

Installation Instructions

For Part Numbers:

300-221 700-469 Airaid Oiled Media Filter

301-221 701-469 SynthaMax Dry Media Filter - Red

302-221 702-469 SynthaMax Dry Media Filter - Black

303-221 703-469 SynthaMax Dry Media Filter - Blue

2007-09 Dodge Ram 2500/3500

6.7L I6 Cummins Diesel

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Cool Air Box 1

4. Filter Adapter 1

5. Urethane Hump Hose 1

6. Weather Strip 22” 1

7. 8/32 x 1/2” Button Head Screw 3

8. #8 Flat Washer 3

9. 1/4-20 Button Head Bolt 3

10. ¼” Flat Washer 4

11. 5/16-18 x 3/4” Hex Head Bolt 1

12. 5/16” Flat Washer 2

13. 5/16” Flange Nut 1

14. M8 x 1.25 x 30mm Hex Bolt 1

15. M6 x 1 x 25mm Hex Bolt 1

16. 3/8-16 Well Nut 1

17. 3/8-16 x 1 1/2” Button Head 1

18. 3/8” Flat Washer 1

19. #72 Hose Clamp 2

20. #259 L-Bracket 1

21. T20 Torx Bit 1

2. Using a 10mm socket, remove the nut that secures

the factory airbox to the radiator support. Next slide

the flexible intake tube off of the factory airbox lid

and then rock the factory airbox assembly side to side

to release it from the mounting grommets, and remove

it from the vehicle.

3. Loosen the hose clamp that secures the factory

intake tube assembly to the rubber elbow on the turbo

inlet, and remove the assembly from the vehicle.

7. Install the supplied well nut (#16) into the factory

airbox mounting hole closest to the fender as shown.

6. Install the L-bracket (#20) onto the radiator shroud

as shown using one M8 x 30mm bolt (#14) and one

flat washer (#12) as shown. Leave the bolt slightly

loose for now.

8. Install the filter adapter (#4) into the Cool Air Box

(#3) using three 1/4” Button Head bolts (#9) and flat

washers (#10) as shown.

4. Remove the two grommets that held the factory

airbox in position.

5. Using a 13mm socket remove one bolt that secures

the fan shroud to the radiator on the passenger side of

the vehicle.

9. Install the CAB into the vehicle as shown. A.) In-

stall the 3/8” button head bolt (#17) and flat washer

(#18) thru the CAB and into the well nut. B.) Install

the M6 x 25mm hex bolt (#15) and flat washer (#10)

thru the CAB and into the captured nut in the fender.

C.) Install the 5/16” bolt (#11) flat washer (#12),

and flange nut (#13) thru the CAB and L-bracket.

Tighten all mounting bolts at this time.

1. Disconnect the negative battery cables.

A) Using the supplied #20 Tor x bit, remove two

screws from the Mass Air Flow sensor, and one screw

from the temperature sensor. Remove both sensors

and the wiring harness anchor from the airbox lid, and

set them aside. B) Loosen the hose clamp that holds

the factory intake tube to the airbox lid.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation Instructions For Part Numbers: 300-221 700-469 Airaid Oiled Media Filter 301-221 701-469 SynthaMax Dry Media Filter - Red 302-221

Seite 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.11.5.13 Thank you for purchasing

Verwandte Modelle: 301-221 | 302-221 | 303-221 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Airaid 300-221 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 300-221 herunter. Airaid 300-221 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 301-221 | 302-221 | 303-221 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Airaid 300-221