Airaid 400-162 Bedienungsanleitung PDF herunterladen

Installation Instructions

For Part Numbers:

400-162 700-445 Airaid Oiled Media Filter

401-162 701-445 SynthaMax Dry Media Filter - Red

402-162 702-445 SynthaMax Dry Media Filter - Black

403-162 703-445 SynthaMax Dry Media Filter - Blue

2004-06 Ford F-150 4.6L 3 Valve

(Does NOT fit 2 Valve or Heritage body)

Component Identification

1. Airaid Premium Filter 1

2. MAF Panel Black 1

3. Bottom Panel Black 1

4. Filter Adapter 1

5. Weather Strip 24 ¾” 1

6. Modular Intake Tube 1

7. Silicone Reducer 1

8. Urethane Hump Hose 1

9. 5/8”x 20” Rubber Hose 1

10. Bushing 3

11. Gasket 4.5” 1

12. ¼ - 20 x 7/8” Bolt 5

13. ¼ - 20 Nut 5

14. ¼” Flat Washer 12

15. 6-32 x 5/16” Screw 7

16. #6 Flat Washer 7

17. 6-32 Keps Nut 7

18. M6 - 1 x 25 Hex Bolt 1

19. Rubber Grommet 2

20. Long Bracket 1

21. #19 Speed Clamp 2

22. #80 Hose Clamp 2

23. #56 Hose Clamp 1

24. #48 Hose Clamp 1

25. Black Hose Mount 1

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

2. Remove air filter and air box from

vehicle.

1. Disconnect negative battery cable.

Unclip factory filter housing from intake

assembly.

3. Assemble the Airaid Cool Air Dam

assembly using the supplied #6

screws, washers and nuts as

shown above.

4. Assemble the Airaid Filter Adapter

plate using the supplied ¼ inch

bolts, washers, spacers and nuts

provided as shown above.

5. Install the supplied gasket on the

Airaid filter adapter as shown.

6. Remove the two factory grommets

from the body and discard.

7. Install the supplied rubber grommets

in place of the factory grommets previ-

ously removed.

8. Install the Airaid Cool Air Dam as-

sembly on vehicle using the factory

intake tube clamp.

9. Mount the Airaid Cool Air Dam as-

sembly to the vehicle using the

supplied metric bolt and washer

and the factory bolt hole as shown

above.

10. Finish mounting the Airaid Cool Air

Dam assembly to body using the

supplied ¼” nuts, bolts, washers

and long bracket as shown. Note:

The long bracket must be mounted

under the factory mounting plate

and grommets.

11. Mount the Airaid air filter on to the

filter adapter using the supplied

hose clamp.

12. Install the supplied weather strip on

the top edge of the Airaid Cool Air

Dam. Note: The weather strip is

pre cut to the proper length. Start

from one end and work your way

around to the other end to insure

even placement.

1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation Instructions For Part Numbers: 400-162 700-445 Airaid Oiled Media Filter 401-162 701-445 SynthaMax Dry Media Filter - Red 402-162

Seite 2 - FILTER IDENTIFICATION

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com P/N 790-551 Aerosol Spray P/N 790-5

Verwandte Modelle: 401-162 | 402-162 | 403-162 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Airaid 400-162 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 400-162 herunter. Airaid 400-162 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 401-162 | 402-162 | 403-162 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Airaid 400-162