Airaid 450-174 Bedienungsanleitung PDF herunterladen

Installation Instructions

For Part Numbers:

450-174 700-461 Airaid Oiled Media Filter

451-174 701-461 SynthaMax Dry Media Filter - Red

452-174 702-461 SynthaMax Dry Media Filter - Black

453-174 703-461 SynthaMax Dry Media Filter - Blue

2012-13 Boss 302 Mustang

5.0L V8

2. A) Loosen the hose clamps on the factor y intake

tube B) Squeeze the clamp and disconnect the resonator

from the air intake tube. C) Carefully depress the hose

lock tab and disconnect the crank case breather line .

D) Remove the factor y intake tube.

3. A) Slide the r ed tab out of the connector and dis-

connect the Mass Air Flow sensor. Carefully pry the har-

ness anchor from the air box using a standard screwdriv-

er. B) Separate the resonator tube from the stand off at-

tached to the Air box lid. C) Using a 10mm socket, re-

move the bolt securing the air box to the inner fender and

remove the air box assembly. This bolt will be reused in

step 12.

4. Unbolt the Intake resonator from the inner fender and

disconnect it at the drivers side firewall. Remove the

entire assembly from the vehicle and set it aside. It will

not be reused.

5. Plug the resonator hole in the firewall with the Fire-

wall Plug (#15).

6. A.) Install the Silicone Reducer (#6) and Hose

clamps onto the Airaid Intake Tube (#2). Place the #56

clamp (#14) on the Throttle body side of the reducer, and

the #64 clamp (#13) on to the tube side.

B.) Inser t the 5/8” Gr ommet (#17) into the Intake

tube as shown. Complete the tube assembly by inserting

the 5/8 Aluminum Fitting (#16) into the Grommet.

8. Install the Mass Air Flow sensor into the intake tube

using two provided 8-32x3/8” screws (#11).

7. Slide the Modular Venturi Tube (#3) into the Airaid

Intake tube (#2). Make sure to align the two slots for the

Mass Air Flow sensor and that the O Ring (#18) is in

Place.

9. Install the Filter Adapter (#7) onto the Airaid Cool Air

Box (#4) as shown.

Use the three 1/4-20 button head bolts (#9), and flat

washers (#10) to secure the Adapter.

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Modular Venturi Tube (MVT) 1

4. Cool Air Box 1

5. Urethane Hump Hose 1

6. Silicone Reducer 1

7. Filter Adapter 1

8. Weather strip 25” 1

9. ¼-20 Button Head Bolt 3

10. ¼” Flat Washer 3

11. 8-32x3/8” Button Head Screw 2

12. #72 Hose Clamp 2

13. #64 Hose Clamp 1

14. #56 Hose Clamp 1

15. Firewall Plug* 1

16. 5/8 Aluminum Fitting 1

17. 5/8 Grommet 1

18. 174 O Ring 1

19. #20 Torx Bit 1

INSTALL NOTE: If you are installing this kit on a vehicle

equipped with a Power Dome Hood with Heat Extractors we

suggest the use of our optional AIRAID pre-filter (Part #799-469)

to give an added layer of protection from the elements

Disconnect The Negative Battery Terminal!

1.Make sure the ignition switch is turned off and the

parking brake has been set.

O Ring

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation Instructions For Part Numbers: 450-174 700-461 Airaid Oiled Media Filter 451-174 701-461 SynthaMax Dry Media Filter - Red 452-17

Seite 2 - Filter Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com 13. Install the Airaid Intake t

Verwandte Modelle: 451-174 | 452-174 | 453-174 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Airaid 450-174 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 450-174 herunter. Airaid 450-174 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 451-174 | 452-174 | 453-174 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Airaid 450-174