Airaid 450-264 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 450-264 herunter. Airaid 450-264 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Installation Instructions
For Part Numbers:
450-264 700-461 Airaid Oiled Media Filter
451-264 701-461 SynthaMax Dry Media Filter - Red
452-264 702-461 SynthaMax Dry Media Filter - Black
453-264 703-461 SynthaMax Dry Media Filter - Blue
2011-14 Ford Mustang GT
5.0L V8
2. A) Loosen the hose clamps on the factory intake
tube B) Squeeze the clamp and disconnect the resonator
from the air intake tube. C) Carefully depress the hose
lock tabs, and disconnect the crank case breather line
and the brake aspirator line (if equipped, AT models
only). D) Remove the factory intake tube.
3. A) Slide the r ed tab, and disconnect the wir ing har -
ness from the Mass Air Flow sensor (MAF). Carefully
pry the harness anchor from the air box using a screw-
driver. B) Separate the resonator tube from the stand off
attached to the Air box lid. C) Using a 10mm socket, re-
move the bolt securing the air box to the inner fender and
remove the air box assembly. This bolt will be reused in
step 9.
4. Install the Grommets and Fittings into the Airaid intake
tube (#2). A) All models will require the use of the 5/8”
Fitting (#19) and the 5/8”Grommet (#20). B) Automatic
transmission equipped vehicles will also use the 3/8” Fit-
ting (#18) and 3/8” Grommet (#21). Manual transmission
vehicles will not need the 3/8” components and will use
the Blind Grommet(#22).
5. Using the supplied Torx driver, remove the MAF sen-
sor from the Factory airbox and create the Tube assem-
bly.
A) Slide the Modular Ventur i Tube (#3) into the
Airaid intake tube (#2) making sure to align the two slots
for the MAF sensor. B) Install the MAF sensor into the
intake tube using two provided 8-32x3/8” screws (#12).
Do Not Use The Factory Screws!
6. Install the filter adapter (#8) using three 1/4-20 button
head bolts (#10), and flat washers (#11) into the Airaid
Cool Air Box (CAB) (#4) as shown.
A.
C.
A.
B.
C.
A.
B.
Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Modular Venturi Tube 1
4. Cool Air Box 1
5. Urethane Hump Hose 1
6. Silicone Reducer 1
7. Urethane Cap* 1
8. Filter Adapter 1
9. Weather Strip 25 1
10. ¼-20 Button Head Bolt 3
11. ¼” Flat Washer 3
12. 8-32 x 3/8” Button Head Bolt 2
13. #72 Hose Clamp 2
14. #64 Hose Clamp 1
15. #56 Hose Clamp 1
16. 60mm Hose Clamp 1
17. Firewall Plug* 1
18. 3/8”Aluminum Fitting 1
19. 5/8”Aluminum Fitting 1
20. 5/8”Grommet 1
21. 3/8”Grommet 1
22. Blind Grommet 1
23. #20 Torx Driver 1
Disconnect The Negative Battery Terminal!
1. Remove the Engine cover by simply lifting up, and
set aside.
B
7. Transfer the factory air box mounting grommets. A)
Locate and remove the Two Lower air box mounting
grommets, and install them in the inner fender. B) Re-
move the Upper air box mounting grommet and steel
sleeve, and re-install into the Airaid CAB.
B.
A.
8. Install the hump hose (#5) onto the filter adapter using
two #72 hose clamps (#13) as shown. Leave the two
hose clamps loose for now. Transfer the Resonator stand
off from the factory air box into the CAB.
9. Install the CAB into the vehicle. Make sure that the Air
inlet of the CAB aligns with the factory duct, and the two
locating pins on the bottom align with the factory grom-
mets. Next reinstall the factory bolt that was removed in
step #3 thru the steel sleeve and grommet and into the
inner fender.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation Instructions For Part Numbers: 450-264 700-461 Airaid Oiled Media Filter 451-264 701-461 SynthaMax Dry Media Filter - Red 452-264 7

Seite 2

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com P/N 790-551 Aerosol Spray P/N 790-5

Verwandte Modelle: 451-264 | 452-264 | 453-264 |

Kommentare zu diesen Handbüchern

Keine Kommentare