Airaid 450-265 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 450-265 herunter. Airaid 450-265 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Installation Instructions
For Part Numbers:
450-265 700-458 Airaid Oiled Media Filter
451-265 701-458 SynthaMax Dry Media Filter - Red
452-265 702-458 SynthaMax Dry Media Filter - Black
453-265 703-458 SynthaMax Dry Media Filter - Blue
2011-14 Ford Mustang
3.7L V6*
2. A) Slide the red lock tab back, and disconnect the
wiring harness from the Mass Air Flow sensor (MAF).
Carefully pry the harness anchor from the air box using
a screwdriver. B) Using a 10mm socket, remove the
bolt securing the air box to the inner fender and remove
the air box assembly. This bolt will be reused in step 4.
3. Transfer the factory air box mounting grommets. A)
Locate and remove the two lower air box mounting grom-
mets, and install them in the inner fender. B) Remove the
Upper air box mounting grommet and steel sleeve, and re
-install into the Airaid Cold Air Box, or CAB (#3).
4. Install the CAB into the vehicle. Make sure that the
Air inlet of the CAB mates with the factory duct, and the
two locating cones on the bottom mate with the factory
grommets. Next reinstall the factory bolt that was re-
moved in step #3 through the steel sleeve and grommet
and into the inner fender.
5.Transfer the MAF sensor into the Airaid Intake Tube
(#2) and secure using the supplied 8-32 Button Head
Screws (#8).
Do Not Use The Factory Screws!
6. Install the Grommet and Fittings into the Airaid intake
tube. A) All models will require the use of the 5/8” Fit-
ting (#11) and the 5/8”Grommet (#12). B) Automatic
transmission equipped vehicles will also use the 1/4”
Barbed Fitting (#14) ). Manual transmission vehicles will
not need the 1/4” Hose Fitting and will use the 1/4” Plug
(#13).
8. Insert the Intake Tube into the CAB first, then lower
the Tube down and onto the throttlebody. Tighten the
Hose Clamps.
7. Slip the Hump Hose (#4) and Hose clamps onto the
Airaid Intake Tube. Slide the #64 Hose Clamp (#10) onto
the tube side and the #48 Hose Clamp (#9) onto the En-
gine side. Leave the Hose Clamps loose for now.
9. Secure the Intake Tube to the CAB using the two 1/4”
Button Head Bolts (#6) and 1/4” Washers (#7).
A.
A.
B.
B.
Bolt
Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Cold Air Box 1
4. Silicone Hump Hose 1
5. Weather Strip 25 1
6. ¼-20 Button Head Bolt 2
7. ¼” Flat Washer 2
8. 8-32 x 1/2” Button Head Bolt 2
9. #48 Hose Clamp 1
10. #64 Hose Clamp 1
11. 5/8”Aluminum Fitting 1
12. 5/8”Grommet 1
13. 1/4” NPT plug 1
14. 1/4” NPT Barbed Fitting 1
15. #20 Torx Driver 1
INSTALL NOTE: If you are installing this kit on a vehicle
equipped with a Power Dome Hood with Heat Extractors we sug-
gest the use of our optional AIRAID pre-filter (Part #799-456) to give an
added layer of protection from the elements
Note: Because of space constraints, this Intake system can not
to be used in conjunction with a throttlebody spacer.
* Vehicles equipped with the Ford Performance Package will
need to have the engine cover trimmed for proper fit.
Disconnect The Negative Battery Terminal!
1. A) Loosen the hose clamps on the factory intake
tube B) Carefully depress the hose lock tabs, and discon-
nect the crank case breather line and the brake aspirator
line (if equipped, AT models only). C) Remove the fac-
tory intake tube.
B
#48. #64.
A.
Duct
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation Instructions For Part Numbers: 450-265 700-458 Airaid Oiled Media Filter 451-265 701-458 SynthaMax Dry Media Filter - Red 452-265 7

Seite 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com P/N 790-551 Aerosol Spray P/N 790-5

Verwandte Modelle: 451-265 | 452-265 | 453-265 |

Kommentare zu diesen Handbüchern

Keine Kommentare