Airaid 510-179 Bedienungsanleitung PDF herunterladen

Installation Instructions

For Part Numbers:

510-179 700-458 Airaid Oiled Media Filter

511-179 701-458 SynthaMax Dry Media Filter - Red

512-179 702-458 SynthaMax Dry Media Filter - Black

513-179 703-458 SynthaMax Dry Media Filter - Blue

2005-11 Toyota Tacoma

2007-09 Toyota FJ Cruiser

4.0L V6

Component Identification

1. Airaid Premium Filter 1

2. MAF Panel 1

3. Bottom Panel 1

4. Silicone Hump Hose 1

5. Left Gskt Support Frame 1

6. Right Gskt Support Frame 1

7. Weather Strip 21” 1

8. #64 Hose Clamp 2

9. 6-32x5/16” Screw 6

10. #6 Flat Washer 6

11. 6-32 Keps Nut 6

12. M6-1x25mm Hex Bolt 1

13. 1/4” Flat Washer 1

14. M8x1.25x16mm Hex Bolt 2

15. 5/16” Flat Washer 2

16. 3/16” Plastic Plug 2

17. Small Rubber Washer 2

1. Disconnect the negative battery cable.

Loosen the hose clamp on the factory intake

tube where it connects to the airbox.

2. With a 12mm socket, remove two bolts that

hold the intake tube to the fender.

3. Remove the complete intake tube from the

vehicle.

4. Unlatch the two clips that hold the cover on

the factory airbox and remove the cover and the

factory air cleaner.

5. Remove the rubber gasket from around the

factory air cleaner.

6. Lay the left and right gasket support frames

(#5) & (#6) on a workbench (see inset) and re-

install the factory rubber gasket around the out-

side as shown.

7. Re-install the gasket assembly back into the

factory airbox as shown. Do not tamper with the

factory hydrocarbon filter as this will void the

vehicle manufacturer’s warranty, and street le-

gal status in the state of California.

9. Re-install the factory airbox cover, and re-latch

both clips.

Lock 2 pieces together!

8. Install the two rubber washers (#17) onto the

two plastic plugs (#16) that are provided in the

hardware kit, and insert them into the two weep

holes in the factory air cleaner cover removed in

step #4, as shown

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Inhaltsverzeichnis

Seite 1 - Component Identification

Installation Instructions For Part Numbers: 510-179 700-458 Airaid Oiled Media Filter 511-179 701-458 SynthaMax Dry Media Filter - Red 512-179 702

Seite 2 - Tune-Up Kit!

11. Install the urethane hump hose (#4), and two #72 hose clamps (#8) on the tube of the CAD as close to the panel as possible. Leave the hose clamps

Verwandte Modelle: 511-179 | 512-179 | 513-179 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Airaid 510-179 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 510-179 herunter. Airaid 510-179 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 511-179 | 512-179 | 513-179 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftausrüstung Airaid 510-179