Airaid 200-281 Bedienungsanleitung Seite 1
Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 200-281 herunter. Airaid 200-281 User Manual Benutzerhandbuch
- Seite / 2
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Installation Instructions
For Part Numbers:
200-281 720-472 Airaid Oiled Media Filter
201-281 721-472 SynthaMax Dry Media Filter - Red
202-281 722-472 SynthaMax Dry Media Filter - Black
203-281 723-472 SynthaMax Dry Media Filter - Blue
2011-12 Chevrolet Silverado 2500HD/3500HD
2011-12 GMC Sierra 2500HD/3500HD
6.6L V8 Duramax Diesel “LML”
Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Cool Air Box 1
4. Urethane Hump Hose 1
5. Weather Strip 25” 1
6. ¼ - 20 x 1/2” Button Head Bolt 4
7. ¼” Flat Washer 4
8. 8-32 x 1/2” Button Head Screw 2
9. #72 Hose Clamp 2
10. T-20 Torx Bit 1
1. Disconnect the negative battery cables.
Loosen the clamps on both ends of the factory intake
tube and remove the tube from the vehicle.
2. Disconnect the Mass Air Flow sensor. Rotate the
airbox assembly away from the fender to unseat it
from the mounting grommets and remove the entire
airbox assembly from the vehicle.
3. Using a 10mm socket, remove 4 bolts, and remove
the factory air Box mounting plate.
4. Install the Airaid Cool Air Box (CAB) (#3) into the
vehicle as shown. Reuse three of the factory bolts
from step #3 to fasten the CAB to the inner fender.
Leave the bolts loose for now.
5. Install two #72 hose clamps (#9) onto the urethane
hump hose (#4), and then slip the hump hose onto the
end of the factory turbo intake tube as shown. Leave
the clamps loose for now.
6. A.) Transfer the filter minder and gr ommet
from the factory airbox into the Airaid Intake Tube
(#2).
B.) Transfer the Mass Air Flow sensor into the
Airaid intake Tube and secure using the two 8-32 x
1/2”Button Head Bolts (#6) Do Not Use Factory
Screws!
7.) Insert the Airaid Intake Tube into the CAB first,
and then into the hump hose.
8.) Install four 1/4” button head bolts (#6), and four
flat washers (#7) thru the CAB to secure the Airaid
Intake Tube. Now tighten the three bolts at the bottom
of the CAB and the two hose clamps on the hump
hose.
9.) Reconnect the Mass Air Flow sensor.
A
B
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
1
2
Inhaltsverzeichnis
Seite 1 - Installation Instructions
Installation Instructions For Part Numbers: 200-281 720-472 Airaid Oiled Media Filter 201-281 721-472 SynthaMax Dry Media Filter - Red 202-281
Seite 2 - Tune-Up Kit!
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.11.12.13 P/N 790-551 Aerosol Spr
Verwandte Produkte und Handbücher für Luftausrüstung Airaid 200-281
(2 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.615 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern