Airaid 520-130 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Luftausrüstung Airaid 520-130 herunter. Airaid 520-130 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Component Identification
1. Airaid Premium Filter 1
2. Rear Dam 1
3. Top Dam 1
4. Weather Strip 1
5. Adapter Tube 1
6. Gasket 1
7. Dam Extension 1
8. PCV Line Filter 1
9. 6-32x5/16 Screw 5
10. 6-32 Keps Nut 5
11. #6 Flat Washer 5
12. 1/4-20x7/8 Hex Bolt 4
13. 1/4 Flat Washer 8
14. 1/4-20 Lock Nuts 4
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
Installation Instructions. Read Me!
1) DISCONNECT NEGATIVE (-) BATTERY CABLE.
2) Remove air box top lid.
a) Loosen hose clamp at Mass Air Flow (M.A.F.) meter and airbox lid. See FIG. #1
b) Disconnect MAF sensor wire.
c) Unclip air box lid.
d) Remove lid and filter from vehicle. Set aside for later modification. See FIG. #2
3) Remove, modify and replace air box base.
a) Unbolt three 10mm bolts that fasten the air box base and remove base from vehicle.
b) Remove and discard tube from air box base. See FIG #3
c) Remove insulation pad from air box base. Use a pliers to remove the securing clips. See FIG #4
d) Replace modified air box base in vehicle.
4) Assemble AIRAID.
a) Unbolt MAF from air box lid. See FIG#5
b) Assemble the two Airaid dams using the hardware provided. See FIG#6, 6a, 8
c) Position and bolt the MAF and Filter Adapter Tube onto the Airaid dam with the supplied gasket and hardware. See FIG# 6, 6a, 9
d) Position air filter on to adapter. Finger tighten for now.
5) Install AIRAID.
a) Position over air box base. Rotate filter as necessary to clear air box base. Snap onto base.
b) (Skip this step for 2001 and earlier models) Install the dam extension using the hardware provided as shown. See FIG# 7, 7a
c) Reconnect MAF to inlet tube and tighten clamp.
d) Reconnect MAF wire harness.
e) Press weather seal onto air dam.
6) Finishing up AIRAID Installation.
a) Check for any foreign objects in the air flow path.
b) Reconnect battery cable. Double check your work.
FIG. #1
FIG. #2
Installation Instructions
For Part Numbers:
520-130 720-130 Airaid Oiled Media Filter
521-130 721-130 Airaid SynthaMax Media Filter - Red
522-130 722-130 Airaid SynthaMax Media Filter - Black
523-130 723-130 Airaid SynthaMax Media Filter - Blue
2000-04 Nissan Frontier/Xterra 3.3L V6
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Component Identification 1. Airaid Premium Filter 1 2. Rear Dam 1 3. Top Dam 1 4. Weather Strip 1 5. Adapter Tube 1 6. Gasket

Seite 2 - P/N 790-550 Squeeze Spray

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com Rev.10.14.13 FILTER IDENTIFICATION

Verwandte Modelle: 521-130 | 522-130 | 523-130 |

Kommentare zu diesen Handbüchern

Keine Kommentare